Rocker switches

Rocker switches are electromechanical components for manual switching of electrical circuit.

Most frequently are used in big and small household appliances and other electric devices. Single pole, double pole, double single pole, signal lamps and signal lamp with single pole switch versions are available. DC low voltage signal lamp also available. Basic families of rocker switches are: SP 400; DS 401


Rocker switches and signal lamps SP 400 

Rocker switches and signal lamps SP 400 have the following basic technical characteristics:

 -          operating: manual
 -          basic type of switches: single – pole, double – pole
 -          switching diagrams: on/off, change over, three position,
            momentary switch, switch with signal lamp
 -          type of connector: 6,3 x 0,8mm
 -          cut out for fixing: 12,6 x 34 mm
 -          switching capacity: 10(2)A/ 250 V ~
 -          voltage for signal lamp: 250V ~; 380V ~; 110V ~; 24V ;
            12V
 -          operating temperature: T 125
 -          distance between contacts: more than 3mm; three-pole
            switch – smaller than 3mm
 -          minimal life endurance: switches 10 000 cycles; single
            lamps 15 000 hour
                                    
Other possible executions of switches and lamps are:

 -          form of button: level, button with lens
 -          shape of lens for lamps: high (5 mm); double low (1 mm)
 -          electrical diagram for switches: by customer requirement
 -          colour of housing: black, white,…
 -          colour of button: black, white, red, yellow, green,…
 -          colour of lens: red, yellow, green, blue, transparent,…
 -          colour of glow lamp: orange, fluorescent green,
            fluorescent blue
 -          rocker printings: marks and colour by customer
            requirement

Switches are VDE approved.

Rocker switches and signal lamps DS 401  

Rocker switches and signal lamps DS 401 have the following basic technical characteristics:

 -          operation: manual
 -          basic type of switches: single – pole, double – pole, twice
            unit
 -          switching diagrams: on/off, change over, three position,
            momentary, switch with signal lamp
 -          type of connector: 6,3 x 0,8 mm; 6,3 x 0,8 mm with
            screw buckle
 -          cut out for fixing: 11 x 30 mm; 22 x 30 mm
 -          switching capacity: switches and push –buttons 16(4)A /
            250V ~; 4(2)A / 250V ~ three- pole switch
            10(2)A / 250V ~
 -          operating temperature: T 120
 -          distance between contacts: more than 3mm; three-pole
            switch – smaller than 3mm
 -          minimal life endurance: switches 10 000 cycles; single
             lamps 15 000 hour

 Other possible executions of switches and lamps are:

 -          form of button: flat, soft line, soft line with lens
 -          additional protection of button: by customer requirement
 -          colour of housing: black, white,…
 -          colour of button: black, white, red, yellow, green,…
 -          colour of lens: red, yellow, green, blue, transparent,…
 -          colour of glow lamp: orange, fluorescent green,
            fluorescent blue
 -          rocker printings: marks and colour by customer
            requirement                                     

Switches are VDE approved.


 
 
 
 



 
 



Emvetron d.o.o.,
Trg Tigrovcev 4,
5220 Tolmin
Tel.: 05 38 11 072
Fax.: 05 38 11 073
e-mail:
CopyRight © Emvetron d.o.o., Vse pravice pridržane.
Izdelava spletnih strani: Editor Studios