Signal lamps

Signal lamps are the basic component for signalling in electrical appliances.

Signal lamps are intended for signalling the process in electrical devices such as: large and small household appliances, water heaters, heaters, etc.. Light source can be glow neon lamp, glow wire lamp or LED diode, depending on the power supply voltages and the required life endurance. The basic families of signal lamps are SL 641 and SL 656.


Technical characteristics of signal lamps are as follows:

 -          connection voltage: DC 2, 6, 12, 24 V ; AC 120, 250,
            400 V ~
 -          electric diagram: without or with parallel resistance
 -          operating temperature: T 90; T 120; T 150
 -          type of connector: with wires, direct with connectors
            4,8 x 0,8 mm, connection with  connector R2,5
 -          colour of light: red, yellow, green (fluo), blue,….

 
Other possible versions of signal lamps are:

 -          outside diameter: diam.7; 8,4; 10; 11,5; 12,4; 13,5; 14;
            15,4 mm
            rectangular: 7 x 10,5; 12 x 12; 16 x 16 mm
 -          cut out for fixing: diam.6,2; 7; 9; 10; 11,5; 11,9; 12,5;
            13 mm
 -          rectangular: 5 x 9 mm
 -          material and length of wires: by customer requirements
 -          wire terminals: by customer request

 Signal lamps are VDE approved.
 


 
 



Emvetron d.o.o.,
Trg Tigrovcev 4,
5220 Tolmin
Tel.: 05 38 11 072
Fax.: 05 38 11 073
e-mail:
CopyRight © Emvetron d.o.o., Vse pravice pridržane.
Izdelava spletnih strani: Editor Studios